Key takeaways
Confirm the complete compatibility chain first
Current Xray supports XHTTP as a transport method for VLESS and allows TLS or REALITY as transport security. That server capability does not prove that every application in the fleet supports the same combination. Inventory client platforms and the embedded core versions before changing a production inbound.
Do not copy transport-specific fields blindly from RAW, gRPC, or another setup. Method, path, host, security, and related settings must form one coherent configuration. Review any existing flow or transport options separately instead of assuming they carry over unchanged.
Design rollback before rollout
Keep the previous inbound available during the test window or preserve a known-good profile that does not depend on XHTTP. Create one test user on the new path and validate it on one device before moving the rest of the users.
Current XHTTP recognizes auto, packet-up, stream-up, and stream-one modes. Do not choose a mode solely because a copied configuration recommends it. Start from a supported baseline, change mode only for a measured issue, and record the effect. A running server process cannot compensate for a client that lacks the chosen mode.
Validate sustained traffic after the handshake
After the connection succeeds, open several independent sites, run a longer transfer, check DNS, and keep the tunnel active long enough to expose intermittent termination. Then test reconnect and mobile handover when those are real use cases.
If a regression appears, roll back the last category of change rather than editing transport, security, path, and mode together. Once stability is confirmed, retire the old inbound deliberately and migrate the remaining credentials in controlled batches.
Continue reading